Professional Application of Facade Plasters in Varna in Dobrich
Ensure long-lasting protection and an impeccable appearance for your building with expertly applied facade plaster.
About this service
Ensure long-lasting protection and an impeccable appearance for your building with expertly applied facade plaster. We use high-quality polymer, silicate, and silicone systems that protect against moisture, UV rays, and mechanical damage. Projects from 50 to 5000+ m² are completed within 7 to 45 days, with prices for labour and materials starting from 14 €/m². You receive a finish coat with guaranteed durability and aesthetic appeal.
За обекти в Добрич планираме работата според открития терен, ветровото натоварване и достъпа в райони като Балик, Дружба, Изгрев, Рилци. Офертата отчита реалните условия на място, нужната подготовка и устойчивостта на изпълнението във времето.
What we deliver and which problem we solve
What we deliver
Infra Remonti EOOD specialises in the complete process of applying decorative facade plasters. Our service covers everything from base preparation to the final texturing of your chosen finish coat. We work with a full range of modern plasters – acrylic, silicate, silicone, silicate-silicone, and mosaic – advising our clients on the most suitable material for specific conditions. For the marine climate in Varna and Burgas, with high humidity and salt aerosols, we recommend silicone and silicate-silicone plasters with increased resistance to biological growth. In Sofia and Plovdiv, where temperature fluctuations and urban pollution are key factors, we focus on products with high elasticity and self-cleaning properties. Our teams are equipped with professional PFT plastering machines, as well as tools for manual application, allowing us to achieve perfect uniformity and the desired texture (scraped, dragged) on areas up to 300 m² per day. We cover projects from private houses and villas to large residential complexes and public buildings across Bulgaria, ensuring technically precise execution, compliant with manufacturers' standards such as Baumit, Weber, and Ceresit.
Which problem we solve
Poorly applied or aged facade plaster is a serious problem that compromises not only the appearance but also the structural integrity of the building. We solve problems such as cracking, peeling, and weathering of the finish coat, which arise due to improper base preparation, incompatible materials, or omissions in the application technology. If these defects are not addressed, they lead to water ingress into the walls and thermal insulation system. This causes damp and mould indoors, reduces energy efficiency by up to 30%, and can lead to permanent damage to the reinforcement and load-bearing structure. Another common problem is colour fading and the appearance of stains (efflorescence) due to the use of low-quality pigments or improper mixing ratios. Our intervention prevents these risks. Through precise base diagnostics, the use of compatible primers and certified plasters, and adherence to technological drying times, we guarantee a homogeneous, long-lasting, and weather-resistant finish coat. This eliminates the need for expensive repeat repairs and preserves the value of your investment in the long term.
Does your facade need new plaster?
Contact us on 088 654 0238 for professional consultation and a quote.
What does our facade plaster application service include?
Every stage of the process is carried out with precision and attention to detail to ensure maximum durability and a perfect appearance.
Technical survey and base assessment
We carry out a thorough inspection of the existing surface for strength, evenness, and hygroscopicity. We measure moisture and test the adhesion of old coatings to determine the exact scope of preparatory work. This initial step is crucial to avoid future problems such as plaster detachment.
Professional consultation for material selection
We offer expert advice on choosing between silicone, silicate, polymer, or other types of plaster, based on the base type (concrete, brick, thermal insulation), regional climatic features (Varna, Sofia), and your requirements for breathability, elasticity, and dirt resistance.
Delivery and installation of facade scaffolding
We erect certified facade scaffolding (Layher or frame type), compliant with all occupational safety and health regulations. The scaffolding is secured with a protective mesh that protects surrounding areas from dust and building materials and ensures optimal working conditions for our teams.
Precise masking and protection of elements
All windows, doors, external air conditioning units, railings, and other elements not subject to treatment are meticulously protected with thick foil and UV-resistant adhesive tape. This ensures that they remain perfectly clean and undamaged after the work is completed.
Application of contact primer
Before plastering, we apply a specialized primer, most often with quartz particles (such as Ceresit CT 16 or Baumit UniPrimer). This layer equalizes the absorbency of the base, improves plaster adhesion by over 40%, and prevents stains caused by differences in the base.
Installation of corner and drip profiles
For perfectly straight and strong edges, we install PVC or aluminium corner profiles with mesh. We install drip profiles above windows and on balconies and over windows, which prevent water from running down the facade and protect against the formation of unsightly streaks and seepage.
Machine or manual plaster application
Depending on the project volume and material specificity, we apply plaster with professional machines to achieve maximum productivity and homogeneity, or manually with stainless steel trowels for smaller areas and specific details. Layer thickness is precisely controlled according to grain size.
Structuring and finishing
This is the artistic part where we give the plaster its final look. Using PVC trowels and specific circular or vertical movements, we form the desired texture – 'scraped' (with grooves) or 'dragged' (with a uniform granular surface). Structuring is performed within a precisely defined technological window.
Quality control and corrections
After completing each section, our technical manager performs an inspection under specific side lighting for defects such as unevenness, stains, or non-homogeneous structure. All detected imperfections are corrected immediately, before the material has fully dried.
Complete cleaning and handover of the site
After completing the work and dismantling the scaffolding, we carry out a full clean-up of the construction site. We remove all protective foils, dispose of construction waste, and hand over the site in a fully finished and clean state, ready for use.
Our 8-step plaster application process
We follow a strict technological sequence to provide a coating that is both beautiful and exceptionally durable.
- 1
Step 1: Site preparation and safety
We cordon off the working area and erect the facade scaffolding, including a safety net. We meticulously mask windows, doors, and other elements with UV-resistant tapes and foil. This protects your property and ensures a safe working environment. All activities are carried out in accordance with Ordinance No. 2 on minimum requirements for occupational safety and health.
- 2
Step 2: Cleaning and base repair
The facade is completely cleaned of dust, grease, and unsound sections using a pressure washer (up to 120 bar). All cracks and irregularities in the base are filled with specialized repair mortars. This step is critical, as a sound and clean base is the foundation for good adhesion.
- 3
Step 3: Surface priming
We apply one coat of adhesive, coloured to match the plaster, primer (e.g., Baumit UniPrimer). The primer regulates the absorbency of the base, prevents the plaster from drying too quickly, and creates a strong bond between the render and the finish coat, increasing adhesion by up to 40%.
- 4
Step 4: Installation of finishing profiles
All external corners are reinforced with PVC corner profiles with mesh, which are integrated into the render. We install drip profiles above windows and on terraces. These elements ensure clean, straight lines and protect the facade from running water – a major cause of its premature damage.
- 5
Step 5: Precise material mixing
The facade plaster is mechanically stirred with a professional mixer at low speed until a completely homogeneous, lump-free consistency is achieved. We strictly observe the manufacturer's specified mixing ratio and maturing time. This is key to achieving uniform colour and correct texture.
- 6
Step 6: Plaster application
Using a stainless steel trowel, the plaster is applied evenly to the primed surface. The layer thickness must correspond to the grain size in the plaster (e.g., for 1.5 mm grain, a 1.5 mm layer is applied). We work on entire walls without interruption ('wet on wet') to avoid joints.
- 7
Step 7: Texture shaping
Immediately after application, while the material is still wet, texturing is performed with a plastic trowel. Depending on the desired effect, movements can be circular, vertical, or horizontal. This step requires great craftsmanship and speed to achieve a homogeneous and aesthetic final appearance across the entire area.
- 8
Step 8: Drying and technological protection
The freshly applied plaster is protected from direct sun, rain, and strong winds during the first 24-72 hours by the scaffolding's protective mesh. Full drying and reaching operational strength takes between 7 and 21 days, depending on humidity and temperature. No mechanical impact is allowed during this period.
Ready to transform your facade?
Get a detailed quote for your project today.
Why choose Infra Remonti for your facade plaster?
We offer more than just plaster application - we provide a long-term and technically sound solution.
- 15-year written warranty for labour and materials, covering cracking, peeling, and significant fading.
- We work only with certified external thermal insulation composite systems (ETICS) and plasters from Baumit, Ceresit, Weber.
- Precise plaster selection based on climate: silicone for Varna/Burgas, self-cleaning for Sofia/Plovdiv.
- Breathability (permeability) of the system – we use materials with a low Sd coefficient (<0.5m), preventing condensation.
- Adherence to strict technological requirements – work at temperatures between +5°C and +25°C.
- Machine application for large areas, ensuring ideal homogeneity and execution speed of up to 300 m²/day.
- We use only high-quality pigments with UV protection, guaranteeing colour stability for over 15 years.
- Detailed, itemized quote with no hidden costs. You pay exactly what was agreed.
- Our team includes certified applicators, trained directly by the material manufacturers.
- Quality control at every stage by a technical manager, guaranteeing uncompromising execution.
- Full protection of your property – windows, doors, and adjacent areas remain clean after us.
- Experience with over 250 completed facades, ranging from single-family houses to apartment blocks over 3000 m².
Калкулатор за Топлоизолация
Получете ориентировъчна цена за фасадна топлоизолация за под 60 секунди.
Какъв е типът сграда?
Изберете най-близкия вариант – ще уточним детайлите на място
Do you have questions about prices or materials?
Our experts are available to provide free consultation on 088 654 0238.
Materials we use for the perfect finish
Choosing the right material is just as important as its quality application. We work only with proven brands.
Silicone plaster (Ceresit CT 74/CT 75)
High-quality decorative plaster with BioProtect formula, providing exceptional resistance to mould, mildew, and algae. It has a strong self-cleaning effect ('lotus effect') and high vapour permeability (Sd ≈ 0.14 m). Extremely elastic and UV-resistant, it is the ideal choice for areas with high humidity like Varna and Burgas. Available in over 500 colours.
Silicate plaster (Baumit SilikatTop)
Mineral plaster based on potassium water glass, characterized by the highest vapour permeability (Sd < 0.05 m). This makes it a perfect finish coat for mineral wool systems and for renovating old buildings. Its naturally high alkalinity (pH ≈ 12) provides natural protection against microorganisms. Hardens through a chemical reaction with the base (silicatization).
Silicate-silicone plaster (Weber pas TOPDRY)
Hybrid plaster that combines the advantages of silicate and silicone products. It offers excellent vapour permeability, comparable to silicate, and high water-repellent properties, characteristic of silicone. It features innovative technology for hydrophilic and hydrophobic effects, which keeps the facade dry and clean. A universal solution for all climatic conditions.
Polymer (acrylic) plaster (SikaMur-Color E)
Acrylic dispersion based plaster, distinguished by exceptional mechanical strength, elasticity, and crack resistance. It is available in the widest range of saturated and vibrant colours. Due to its lower vapour permeability (Sd ≈ 0.4-0.8 m), it is mainly suitable for systems with EPS insulation in areas with lower air humidity. Very good resistance to urban pollution.
Mosaic plaster (Baumit MosaikTop)
Extremely strong and resistant to impact and abrasion plaster, consisting of colourful quartz stones and acrylic resin. It is mainly used for plinths, entrance areas, columns, and other details subjected to intensive stress and pollution. Completely waterproof and easy to clean, it provides long-lasting protection for the most vulnerable parts of the building.
Quartz primer (Ceresit CT 16)
Contact primer containing fine quartz sand, which creates a rough surface for optimal adhesion of the decorative plaster. It equalizes the absorbency of the base and is coloured to match the plaster, preventing the base from showing through. Its use is mandatory and is a critical factor for the durability of the entire system. Coverage rate: ~0.3 kg/m².
Types of properties we work for
Our expertise covers a wide range of buildings, each with its specific requirements for facade cladding.
Frequently asked questions
Related services in Facades & insulation
Ready for a facade that combines style and durability?
Don't delay the renovation of your home or building. Contact the Infra Remonti EOOD team today on +359 88 654 0238. We will arrange a free on-site survey, discuss your needs in detail, and prepare a transparent and competitive offer for you. Invest in quality that will protect and beautify your property for decades, backed by our 15-year written warranty.
Заявете безплатен оглед
Стъпка 1 от 5 — Контактна информация
Или ни се обадете директно:
088 654 0238Ready to get started?
Don't delay the renovation of your home or building. Contact the Infra Remonti EOOD team today on +359 88 654 0238. We will arrange a free on-site survey, discuss your needs in detail, and prepare a transparent and competitive offer for you. Invest in quality that will protect and beautify your property for decades, backed by our 15-year written warranty.
☎ 088 654 0238